A-Lock IEC320 C14 to IEC320 C19 Universal Locking 15A 250V
Reference guide:Locking power cords guide →
4
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
| Compare | Part number | Plug | Connector | Length | Jacket | Colour | Stock | Price | Add to order |
|---|---|---|---|---|---|---|---|---|---|
| 1419K-H-072A-Lock | C14 | C19 | 6 Feet | 14 AWG · SJT | Black | Build to order | $15.71 | ||
| 1419K-H-072-WHTA-Lock | C14 | C19 | 6 Feet | 14 AWG · SJT | White | Build to order | $15.71 | ||
| 1419K-H-144A-Lock | C14 | C19 | 12 Feet | 14 AWG · SJT | Black | Build to order | $21.43 | ||
| 1419K-H-144-WHTA-Lock | C14 | C19 | 12 Feet | 14 AWG · SJT | White | 4 in stock | $21.43 |
About A-Lock IEC320 C14 to IEC320 C19 Universal Locking 15A 250V
LOCKING IEC 60320 C14 to C19 Power Cords feature a locking mechanism on the C19 (female) end of the cable. C14 to C19 locking power cables are used in data centers and for critical OEM equipment to protect against accidental disconnects and to ensure a secure connection.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · IEC 60320
IEC 60320 C14
- 15 Amps
- 250 volts
On 4 of the cords here
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
Connector
IEC 60320 C19 Locking (A-Lock)
- 20 Amps
- 125/250V
On 4 of the cords here
The IEC 60320 C19 Locking Connector is rated for 20 Amps and 250VAC. It is a grounded connector type, with the A-Lock feature for latching the connector in place once it is mated. The A-Lock is a universal locking mechanism that internally pinches the pins of the male/inlet that it connects with. This effectively holds the connector in place until the user pinches and pulls back the two red tabs located on either side of the connector body.
Mates with IEC 60320 C20 Inlet
About A-Lock IEC320 C14 to IEC320 C19 Universal Locking 15A 250V
IEC 60320 C14 Connector (Male)
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
IEC 60320 C19 Locking Connector (Female)
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. (However, when used in a cord set with a C14, the rated amperage is 15A due to the restrictions from the C14) The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing devices. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.
Wire & Cordage
Our C14 to C19 A-Lock (sometimes referred to as an Auto-Lock) power cables utilize 14awg-3c wire in order to provide 15 amperes. Our cables utilize a robust SJT outer jacket suitable for indoor use such as data centers, office buildings, networking closet, and more.
Current rating
15 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C14
Connector (female end)
IEC 60320 C19 Locking (A-Lock)
Certifications & compliance
- UL
- cUL
- RoHS
- REACH
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.